Back to Blog

Patent Drawings in Belgium: 7 Proven OPRI Rules

Draughtsman checking patent drawings in Belgium against Article 14 sheet margins

Belgium is the jurisdiction where nobody tells you your figures are wrong. There is no request for substantive examination at the Belgian Office for Intellectual Property (OPRI), and the patent is granted irrespective of what the search report says. That makes patent drawings in Belgium an unusual drafting problem: a formality defect does not get a chance to be corrected by an examiner, it simply travels into the granted patent and waits for a revocation counterclaim in Brussels. Add the fact that most Belgian protection now arrives through the European Patent Office rather than through OPRI, and you have one invention answering to two different drawing rulebooks at once.

Why Patent Drawings in Belgium Answer to Two Rulebooks

Two filing routes governing patent drawings in Belgium: OPRI and the EPO
Photo: Brussels government building by night (28747759446) by Thomas Quine (CC BY 2.0)

There are two ways an invention ends up protected in Belgium, and they do not share a drawing standard.

The first is a national Belgian application filed with OPRI, part of the Federal Public Service Economy. Its drawing formalities sit in Article 14 of the Royal Decree of 2 December 1986 on the application for patents and the granting and maintenance of patents. That text is closely modelled on PCT practice, and it is still fully black-and-white.

The second is a European patent that designates Belgium, whether filed directly at the EPO or arriving there from an international application. This route now carries most of the traffic, for a reason many foreign filers miss: OPRI stopped acting as a PCT receiving Office on 1 April 2018, and Belgium does not offer a national phase for international applications. Belgium sits in the group of EPC states โ€” with Cyprus, France, Greece, Ireland, Italy, Latvia, Monaco, Malta, the Netherlands and Slovenia โ€” where a PCT family can only reach national effect through the EPO.

The practical consequence is blunt. If your Belgian protection comes from a PCT application, Article 14 never applies to you and EPO drawing practice governs instead. If you are filing nationally โ€” usually for speed, cost, or a Belgian-only commercial footprint โ€” Article 14 is the only thing standing between your sheets and a granted patent, because nobody at OPRI will examine them on the merits.

Teams that file in both directions should decide early which rulebook the master figure set is built to. We default to the stricter of the two, then relax it for the European route, rather than building a colour EPO set and discovering it cannot be reused nationally.

Rule 1 and 2: Sheet Size, Usable Surface and Margins Under Article 14

Article 14 gives you an A4 sheet (29.7 ร— 21 cm) with a useful surface of 26.2 ร— 17 cm. The paper must be flexible, strong, white, smooth, matte and durable, used on one side only.

The margins follow from that usable area:

  • Top margin: 2.5 cm
  • Left margin: 2.5 cm
  • Right margin: 1.5 cm
  • Bottom margin: 1.0 cm

If those four numbers look familiar, they should. They are the same margins and the same 26.2 ร— 17 cm sight that PCT Rule 11.13 imposes, and the same ones the USPTO sets out in 37 CFR 1.84(g). A sheet built to US utility practice will therefore clear the Belgian margin test without alteration โ€” which is the single biggest piece of good news in this article, and the reason a well-prepared US set is usually 90% of the way to Belgian compliance.

Where US and Belgian sheets diverge is page size. 37 CFR 1.84(f) lets you use either A4 or 21.6 ร— 27.9 cm letter paper. Article 14 does not offer letter. A figure set drawn on letter stock with correct margins still fails in Belgium on sheet dimensions alone, so convert the canvas rather than rescaling the artwork and hoping line weights survive.

Rule 3: Colour Is Now Allowed at the EPO and Still Banned at OPRI

Colour versus black line work in patent drawings in Belgium
Photo: <div class=’fn’> Post-medieval : Vessel Sherd</div> by York Museums Trust, Rebecca Griffiths, 2015-10-22 11:29:04 (CC BY 2.0)

This is the rule most likely to be out of date in whatever checklist you are using, and it is the one we are asked about most often.

Article 14 requires drawings executed in black, sufficiently dense and dark, uniformly thick and well-defined lines, without colours or washes. Hatching is allowed, but it must not obscure reference signs. There is no petition procedure to escape this; colour simply is not a Belgian national option.

European practice has moved. Rule 46 EPC โ€” the provision that used to carry the heading “Form of the drawings” โ€” was deleted with effect from 1 February 2023 as part of the Administrative Council’s digital-transformation package, together with most of Rule 49(3) to (12) EPC. The form requirements did not disappear; they moved into a Decision of the President of the EPO published in the Official Journal, which means the EPO can now change presentation rules without amending the Implementing Regulations. Any guide still describing Rule 46 EPC as live law is citing a rule that has not existed for more than three years.

The EPO used that new freedom quickly. Under a Decision of the President dated 25 July 2025 (OJ EPO 2025, A49), supplemented by a Notice (OJ EPO 2025, A57), the EPO has accepted colour and greyscale drawings filed electronically since 1 October 2025. The drawings must be rich enough in contrast to display clearly at 300 dpi, and the Receiving Section examines that under Rule 57(i) EPC. Description, claims and abstract stay monochrome.

The PCT did not follow. PCT Rule 11.13(a) still demands black lines “without colorings”, so an international application is not a route to colour figures. For a Euro-PCT case the EPO will only work from colour where colour drawings are actually on PATENTSCOPE and the international publication says so, and adding colour later invites an Article 123(2) EPC objection.

Net effect for patent drawings in Belgium: one invention can legitimately need a colour master for the EPO, a greyscale-safe reduction for the PCT, and a pure black-line set for OPRI. Decide which is the master before the draughtsman starts, because converting colour down to compliant black line work is a redraw, not a filter.

Rule 4: Lettering Height โ€” 0.3 cm in Belgium, 0.32 cm in the US

Article 14 sets a minimum height of 0.3 cm for figures and letters on the sheet. The USPTO requires at least 0.32 cm (one eighth of an inch) under 37 CFR 1.84(p)(3), and PCT Rule 11.13 uses the same 0.32 cm floor.

The asymmetry is worth internalising because it only runs one way. A US- or PCT-compliant set clears Belgium on character height automatically. A set drawn to the Belgian 0.3 cm minimum may be two hundredths of a centimetre short for the USPTO โ€” invisible on screen, fatal on a Notice to File Corrected Application Papers.

In practice we set every master set at 0.32 cm or above and stop thinking about it. Lettering is also where exported CAD sheets quietly fail: a drawing scaled to fit a new canvas scales its text too, and a 0.35 cm label on an A3 export lands well under the minimum once reduced to A4.

Rule 5 and 6: Figure Numbering, Reference Signs and Text on the Sheet

Article 14 requires views to be numbered consecutively in Arabic numerals, independently of the numbering of the sheets. Figure 7 is Figure 7 whether it sits on sheet 2 or sheet 5, and a renumbering after a late figure insertion has to propagate through the description.

Reference signs are the discipline that catches most filings. Belgian practice allows a reference sign on the drawing only where that sign appears in the description and in the claims, and the same sign must denote the same element throughout the application. That is stricter housekeeping than many US-origin sets carry, because 37 CFR 1.84(p)(5) polices consistency between drawings and description but does not condition a sign on claim usage.

If the case is heading to Europe, remember what the signs then have to do under Rule 43(7) EPC: reference signs appearing in the claims are placed in parentheses, are included where they increase clarity, and are not construed as limiting the claim. In a two-part claim they belong in both the preamble and the characterising portion. Signs that exist only on the sheet and nowhere in the claims are the ones that create the Belgian mismatch.

Text on the sheet is tightly limited. Article 14 permits only indispensable short indications โ€” “water”, “steam”, “open”, “closed” and the like. Circuit, block and process diagrams may carry the few essential keywords needed to make them readable, but a figure annotated like a slide deck will not pass. Put the explanation in the brief description of the drawings, not on the artwork.

  1. Number views consecutively in Arabic numerals, independently of sheet numbers.
  2. Use a reference sign on a figure only if it appears in both the description and the claims.
  3. Keep one sign per element across every sheet and every amendment.
  4. Limit on-sheet text to indispensable short indications.
  5. Keep hatching clear of reference signs so neither obscures the other.

Rule 7: Belgian Design Representations Go to BOIP, Not to OPRI

There is no Belgian national design registration. Belgium, the Netherlands and Luxembourg share one design right, administered by the Benelux Office for Intellectual Property (BOIP) in The Hague, and OPRI has nothing to do with it.

That matters because BOIP’s representation rules are almost the opposite of Article 14. Representations may be drawings or photographs, colour filings are published in colour, and at least one representation must show the product in its entirety. The trade-off is scope rather than form: a design registered in colour is protected in that colour, and a black-and-white registration is read accordingly, so the choice of representation is a substantive decision about the breadth of the right.

US practitioners should not map this onto design patent practice. Under 37 CFR 1.152, a US design must be represented by a drawing that complies with 37 CFR 1.84 and must contain enough views to constitute a complete disclosure of the design’s appearance. Broken lines may show visible environmental structure but may not be used for hidden planes and surfaces that cannot be seen through opaque materials, and appropriate surface shading is expected to show the character and contour of the surfaces. A photograph-led Benelux filing and a 37 CFR 1.152 design patent are two different documents, built from different line conventions, and reusing one as the other is how scope gets lost.

No Substantive Examination Means Nobody Checks Your Figures

Belgium is a registration jurisdiction. There is no request for substantive examination โ€” the step does not exist in the procedure.

On payment of the fee, the EPO prepares a novelty search report with a written opinion on patentability for the Belgian application. That opinion is genuinely useful, and it is genuinely non-binding: it does not bind OPRI, it is not an examination of patentability, and the patent is granted irrespective of what it concludes, generally around 18 months from filing.

So the ordinary feedback loop that catches drawing problems in the US or at the EPO โ€” an objection, an opportunity to file replacement sheets, a corrected set approved before allowance โ€” is absent. A missing reference sign, an inconsistent numeral, a wash that should have been hatching: none of it generates a letter. It becomes part of a granted Belgian patent.

This is why we treat a pre-filing figure sweep as mandatory rather than optional for Belgian national filings. The cost of a review before filing is trivial next to arguing, years later, that a figure a court is reading against you does not mean what it appears to mean.

Where Belgian Drawing Defects Surface: Brussels and the UPC

When a Belgian figure set finally gets tested, it is tested in one of two forums, and neither of them is local to your client.

For national rights, the Brussels Enterprise Court has exclusive jurisdiction over patent and SPC disputes for the whole of Belgium, with appeals to the Brussels Court of Appeal. A company in Antwerp, Ghent or Leuven does not litigate at home; every patent dispute is a Brussels dispute. Because OPRI never examined the patent, validity is argued from scratch, and the drawings are read as filed โ€” with any ambiguity in them working against the patentee who created it.

For European patents with unitary effect and for non-opted-out classical EPs, the UPC local division in Brussels sits in the FPS Economy building at Rue du Progrรจs 50, 1210 Brussels. It is the only UPC division able to hear proceedings in four languages โ€” Dutch, French, German and English โ€” which makes it a deliberate venue choice for multilingual disputes rather than merely the Belgian default.

Either way, the figures are evidence. Clear, internally consistent sheets are the cheapest claim-construction insurance available, and in a jurisdiction with no examination they are the only quality control the file ever received.

A Practical Checklist Before You File in Belgium

Run this before any Belgian national filing, and before reusing a Belgian set elsewhere:

  1. Confirm the route. PCT origin means the EPO regional phase and EPO drawing practice; Article 14 does not apply.
  2. Convert to A4 at a 26.2 ร— 17 cm sight, with 2.5 / 2.5 / 1.5 / 1.0 cm margins.
  3. Strip colour and washes for OPRI; keep the colour master only for electronic EPO filing.
  4. Set lettering at 0.32 cm or above so one set clears Belgium, the PCT and the USPTO.
  5. Audit every reference sign against both the description and the claims.
  6. Renumber views consecutively in Arabic numerals after any late figure insertion.
  7. Send design representations to BOIP, and decide colour versus monochrome as a scope question.

If the same invention is also going to the USPTO, read the US formalities alongside this: our guide to the USPTO drawing requirements under 37 CFR 1.84 covers the sheet, line and lettering rules in full, and the PCT drawing requirements explain the Rule 11.13 baseline that Article 14 was built from. For the colour question specifically, see EPO colour patent drawings.

Belgium also rewards comparison with its closest procedural neighbours. Patent drawings in the Netherlands and patent drawings in Ireland cover the other two EPC states that also closed their national PCT route, and validating a European patent in Belgium picks up where this article stops.

Get Belgian-Compliant Figures Before You File

PerspireIP draughtsmen prepare and remediate patent drawing services for national Belgian filings, European applications and PCT families from one master set, so the same invention clears Article 14, current EPO practice and PCT Rule 11.13 without three separate redraws. We work directly with attorneys in Brussels and Leuven, and across the wider Belgium practice.

Send us the sheets you already have and we will tell you which route they pass and which they fail. Contact PerspireIP for a figure review before your next Belgian filing.

Frequently Asked Questions

Do patent drawings in Belgium have to be black and white?

For a national filing at OPRI, yes. Article 14 of the Royal Decree of 2 December 1986 requires black, sufficiently dense and dark, uniformly thick and well-defined lines without colours or washes. Colour is available on the European route, not the Belgian national one.

Is Rule 46 EPC still the rule for European drawings?

No. Rule 46 EPC was deleted with effect from 1 February 2023. The form requirements for drawings now sit in a Decision of the President of the EPO published in the Official Journal, which is why the EPO was able to allow colour from 1 October 2025 without amending the Implementing Regulations.

Can I enter the PCT national phase in Belgium?

No. OPRI stopped acting as a PCT receiving Office on 1 April 2018 and Belgium has no national phase for international applications. A PCT family reaches Belgium through the EPO regional phase, so EPO drawing practice governs those figures.

Will a Belgian examiner object to a defective drawing?

There is no substantive examination in Belgium. The EPO prepares a search report and written opinion, but it does not bind OPRI and the patent is granted irrespective of the result, usually about 18 months from filing. Drawing defects are not objected to โ€” they are granted.

Where are Belgian patent disputes heard?

The Brussels Enterprise Court has exclusive jurisdiction over Belgian patent and SPC disputes nationwide, with appeals to the Brussels Court of Appeal. European patents may instead be litigated before the UPC local division in Brussels, which can hear cases in Dutch, French, German or English.

Do Belgian design filings follow the same drawing rules?

No. Designs are filed with BOIP for the whole Benelux, and BOIP accepts photographs as well as drawings, in colour or monochrome. Article 14 applies to patents at OPRI only, and US design practice under 37 CFR 1.152 is different again.