Table of Contents
Funding an Indian subsidiary looks like a treasury question and is really three regulatory questions. Equity sits under the foreign investment rules; a loan from outside India is an external commercial borrowing; an unpaid parent invoice is trade credit with its own clock. On 16 February 2026 the Reserve Bank moved the entire borrowing framework into new Regulations and deleted the twelve paragraphs everyone had been working from. Here is what now applies, cited to the RBI text it was read from.
The Capital Call That Arrives Before Anyone Has Read the Rules

The Indian subsidiary is incorporated, the first hires are made, and then the finance director asks the question that should have been settled two months earlier: how do we actually get the money in? Equity? A loan from the parent? Just let the intercompany payable run? Each of those is a different transaction under India’s exchange control law, answerable to a different schedule, with a different clock and a different exit.
Funding an Indian subsidiary is not one decision with three wrappers. It is three regulated channels. Equity sits under the foreign investment rules. A loan from anyone outside India is an external commercial borrowing, or ECB. Letting the parent’s invoice go unpaid past a point is trade credit, which has its own maturity limit and its own price ceiling. Choose by tax habit alone and you will eventually be choosing in breach.
And the ECB half of that picture was rewritten this year. On 16 February 2026 the Reserve Bank of India moved the entire external commercial borrowing framework out of the Master Direction that had housed it since 2019 and into the borrowing regulations themselves, with materially different eligibility, limits, pricing and reporting. Every provision below is cited to the RBI page it was read from on 17 November 2026.
Funding an Indian Subsidiary Changed on 16 February 2026

The instrument is the Foreign Exchange Management (Borrowing and Lending) (First Amendment) Regulations, 2026, Notification No. FEMA 3(R)(5)/2026-RB, dated 9 February 2026 and published in the Official Gazette on 16 February 2026.
What makes it unusually disruptive is not only the substance but the relocation. A.P. (DIR Series) Circular No. 22 (RBI/2025-26/221) of 16 February 2026 directs that “Authorised Dealer Category I banks are directed to be guided by the amended Regulations while facilitating borrowing and lending transactions governed by these Regulations”, and then deletes the old text outright.
Three deletions, stated in that circular: “Para 1 to 12 of Master Direction – External Commercial Borrowings, Trade Credits and Structured Obligations shall be deleted”; “Para 2 of Master Direction – Borrowing and Lending transactions in Indian Rupee between Persons Resident in India and Non-Resident Indians/ Persons of Indian Origin shall be deleted”; and “Part I of FAQs on External Commercial Borrowings (ECB) and Trade Credits shall be deleted.”
Paras 1 to 12 were the ECB framework. Open the Master Direction today — it is marked “Updated as on September 08, 2026” — and Part I is a column of “[Deleted]” entries with the old wording preserved in footnotes. The live ECB rules are now Schedule I of the Regulations.
This matters for a practical reason. Almost every advisory page, checklist and internal playbook describing Indian ECB rules was written against those twelve paragraphs. The figures in them are no longer the law, and the forms have been renamed. If your treasury team is working from a 2024 memo, it is working from deleted text.
Route 1: Equity, Which Is Fast, Permanent and Priced by a Valuer
Funding an Indian subsidiary with equity is the default and usually the right first tranche. It needs no maturity, no interest, no lender consent and no registration number before the money moves. What it does need is a price a valuer will stand behind, and a filing.
On price, paragraph 8.1.1(2) of RBI’s Master Direction on Foreign Investment in India sets the floor for an unlisted Indian company as “the valuation of equity instruments done as per any internationally accepted pricing methodology for valuation on an arm’s length basis duly certified by a Chartered Accountant or a SEBI registered Merchant Banker or a practicing Cost Accountant”. A parent cannot subscribe at par simply because it owns the company.
On filing, the issue is reported in Form FC-GPR “within thirty days from the date of issue”. That is the first of the several reporting clocks a new subsidiary starts without noticing; we walk all of them in our guide to FEMA reporting after you invest in India.
The real cost of equity is not the filing. It is irreversibility. Capital that goes in as equity comes out only through a dividend, a share sale capped by a certified valuation, or a liquidation — the routes and their ceilings are set out in our article on repatriation of funds from India. Debt, by contrast, repays itself on a schedule.
Route 2: The Parent Loan Is an ECB, and You Probably Qualify Now

A loan from the foreign parent to the Indian subsidiary is an external commercial borrowing. That was true before February and it is true now. What changed is who may borrow, and from whom.
Schedule I, section 1(1) is the new eligibility test: “Any person resident in India (other than an individual) that is incorporated, established or registered under a Central or State Act is an eligible borrower, subject to the condition that such person is permitted for ECB in terms of applicable Act(s).” The deleted paragraph it replaces read “All entities eligible to receive FDI”, plus a named list of Port Trusts, SEZ units, SIDBI and EXIM Bank.
That is a shift from a sector-and-investment-eligibility test to an incorporation test with a statutory carve-back. Whether your particular vehicle clears it is a question about the Act that constitutes it, which is one more reason to settle the vehicle before the funding plan — see our comparison of the four India entry vehicles.
The lender side moved further. Section 2 now permits ECB from “(a) A person resident outside India; (b) A branch outside India of an entity whose lending business is regulated by the Reserve Bank; and (c) A financial institution or a branch of a financial institution set up in IFSC”.
Compare the deleted text: “The lender should be resident of FATF or IOSCO compliant country”, alongside a defined “Foreign Equity Holder” category meaning “(a) direct foreign equity holder with minimum 25% direct equity holding in the borrowing entity, (b) indirect equity holder with minimum indirect equity holding of 51%”. Neither the jurisdiction-compliance condition nor the equity-holder percentages appear anywhere in Schedule I.
For a group treasury this is the single most consequential change. The old framework made the parent’s shareholding percentage and the lender jurisdiction’s FATF status gating questions. The new one asks whether the lender is a person resident outside India.
Two eligibility conditions do bite. Section 1(2): a borrower under a restructuring scheme or corporate insolvency resolution process “may raise ECB only if specifically permitted under the restructuring or resolution plan”. Section 1(3): a borrower facing a pending FEMA investigation, adjudication or appeal may still raise ECB, but “shall, however, disclose information about the pending investigation, adjudication or appeal under ‘Form ECB 1′”.
The Limit Is No Longer an Annual Allowance
This is the change most likely to be mis-modelled, because the new limit is not a smaller or larger version of the old one. It is a different shape.
Section 5(1): “An eligible borrower may raise ECB up to the higher of (a) outstanding ECB up to USD 1 billion; or (b) total outstanding borrowing (external and domestic) up to 300 per cent of net worth as per the last audited standalone balance sheet of the borrower.” Section 5(2) requires the proposed ECB, excluding refinancing, to be counted when testing compliance. Section 5(3) exempts entities supervised by a financial sector regulator.
The deleted paragraph read: “All eligible borrowers can raise ECB up to USD 750 million or equivalent per financial year under the automatic route.” Note what each measures. The old limit was a flow — a fresh allowance every financial year. The new limit is a stock — what is outstanding, tested continuously.
Three consequences fall out of that, and they cut in opposite directions depending on the size of the borrower:
- A large borrower gains room. USD 1 billion of outstanding ECB, or 300 per cent of net worth if that is higher, is more headroom than USD 750 million a year for most groups — and repayment now restores capacity rather than wasting an expired annual allowance.
- A new subsidiary may have almost none. If net worth is thin and the USD 1 billion leg is irrelevant, 300 per cent of the last audited standalone balance sheet can be a small number. A company incorporated this year is testing against an audited net worth that may barely exist.
- Domestic debt now competes with foreign debt. Leg (b) counts “external and domestic” borrowing together. An Indian working capital facility consumes the same headroom as the parent loan. Treasuries used to modelling the two separately will over-estimate capacity.
The planning point when funding an Indian subsidiary is sequencing, not cleverness. Equity first builds the net worth that leg (b) measures; debt layered on afterwards has something to be a multiple of. Reversing that order is how a funding plan stalls at the authorised dealer bank.
Pricing: the Basis-Point Ceiling Is Gone, Arm’s Length Is Not
Section 7(1) is five words long and replaces a rate card: “The cost of borrowing shall be in line with prevailing market conditions.”
The deleted text set hard spreads. For foreign-currency ECB: “Benchmark Rate plus 550 bps spread: For existing ECBs linked to LIBOR whose benchmarks are changed to ARR. Benchmark rate plus 500 bps spread: For new ECBs”. For rupee-denominated ECB: “Benchmark rate plus 450 bps spread.” Those numbers are no longer the test for an ECB of three years or longer.
One tether remains. Section 7(2): “In case of eligible ECBs with average maturity period of less than three years, the cost of borrowing shall be in compliance with cost ceiling specified for Trade Credit under these regulations. In the case of fixed rate loans, the floating rate plus spread of the corresponding swap shall not be more than the ceiling.” Short money is still capped; long money is priced by the market.
What counts as cost is defined. Regulation 2(g): “‘cost of borrowing’ means rate of interest, other fees, expenses, charges, guarantee fees and export credit agency charges, whether paid in FCY or INR, but shall not include commitment fees and statutory taxes payable in India”. Section 8 adds that “Prepayment charges or penal interest, if any, for default or breach of covenants shall be in line with prevailing market conditions.”
The benchmark itself is defined in Regulation 2(e) as “any widely accepted interbank rate or Alternative Reference Rate (ARR) of 6-month tenor, applicable to the currency of borrowing” for foreign-currency borrowing, and as “prevailing yield of the Government of India security of corresponding maturity” for rupee borrowing.
Then the sentence that should govern every intercompany loan paper. Section 9: “Arm’s length principle – ECB from a related party shall be carried out on an arm’s length basis.” A nil-interest or token-interest parent loan is not made safe by the removal of the ceiling. Deregulating the maximum did not deregulate the price.
Maturity: Three Years, Unless You Manufacture
Section 6(1): “An eligible borrower shall raise ECB with minimum average maturity period (MAMP) of three years.”
Section 6(2) carves out one sector: “An eligible borrower engaged in manufacturing sector may also raise ECB with average maturity period between one year and three years, subject to the condition that outstanding amount of such ECBs shall not exceed USD 150 million.”
So a one-to-three-year parent loan is available to a manufacturer within that cap, and is available to anyone else only at the trade-credit price ceiling under section 7(2). Structuring a two-year intercompany loan for a services subsidiary without pricing it against that ceiling is a live compliance exposure, not a technicality.
Section 12 governs refinancing: an eligible borrower may refinance an existing ECB in part or full by a fresh ECB, provided the refinancing does not result in failure to meet the MAMP applicable to the original borrowing. You cannot shorten the clock by rolling the loan.
End-Use Is Now a Prohibition List, Not a Permission List
The old framework worked by permission: specified end-uses were allowed, and the deleted negative list included “Working capital purposes, except in case of ECB mentioned at v(b) and v(c)” along with real estate activities, capital market investment and equity investment.
Regulation 3A(1) now states that “Funds borrowed in terms of these Regulations shall not be utilised for the following purposes in India” and lists them. In summary form, with the proviso detail in the Regulations themselves:
- Chit funds and Nidhi companies.
- Real estate business and construction of farmhouses — with provisos for construction-development projects (trunk infrastructure before plot sales) and industrial parks (a minimum of 10 units, no single unit above 50 per cent of allocable area, at least 66 per cent of allocable area for industrial activity).
- Agricultural and animal husbandry, except the listed carve-outs including controlled-condition horticulture, seed development, animal husbandry, pisciculture, aquaculture, apiculture and agro-allied services.
- Plantation, except tea, coffee, rubber, cardamom, palm oil tree and olive oil tree plantation.
- Trading in Transferrable Development Rights.
- Transacting in listed or unlisted securities — except corporate actions such as merger, demerger, amalgamation, arrangement or acquisition of control undertaken under the borrower’s constitutive Act, the SEBI Takeover Regulations, the SARFAESI Act or the Insolvency and Bankruptcy Code.
- Repayment of a domestic rupee loan which was availed for a restricted end-use, or which is classified as a non-performing asset under applicable prudential norms.
- On-lending for any of the prohibited purposes.
Read the list for what it does not say. Working capital and general corporate purposes are absent from it, and the “foreign equity holder” machinery that used to gate exactly those uses is absent from Schedule I entirely. The structure of the test has inverted: the question is no longer whether your use is on the permitted list, but whether it is on the prohibited one.
One carve-out deserves attention from anyone buying into India. Borrowed funds may be used for an acquisition of control undertaken under the takeover or insolvency regimes named in the clause, but not for general securities transactions. If a deal is being financed from outside India, the end-use clause and the diligence findings need to be read together — our guide to financial due diligence on an Indian target covers what those findings usually are.
Route 3: Trade Credit, Which You May Be Using by Accident

The third channel for funding an Indian subsidiary is the one nobody decides to use. The parent ships goods, invoices the subsidiary, and the payable sits there. That is trade credit, and it is regulated.
Section 4(3) of Schedule I expressly excludes trade credit, export advances, investment under the Debt Instruments Regulations, Convertible Notes and FVCI debt instruments from the definition of ECB — so trade credit is not merely a loan by another name; it sits in its own regime. Part II of the Master Direction survived the February deletions and still governs it.
Paragraph 14 of that Part sets the maturity: “The period of TC, reckoned from the date of shipment, shall be up to three years for import of capital goods. For non-capital goods, this period shall be up to one year or the operating cycle whichever is less.”
And the price. For foreign-currency trade credit: “Benchmark Rate plus 350 bps spread: For existing TCs linked to LIBOR whose benchmarks are changed to ARR. Benchmark rate plus 300 bps spread: For new TCs.” For rupee trade credit: “Benchmark rate plus 250 bps spread.” That ceiling is also the one section 7(2) imports for sub-three-year ECB.
The practical trap is the non-capital-goods clock. An intercompany payable for components or inventory that drifts past a year, or past the operating cycle if shorter, is not a cash-flow convenience. It is a trade credit that has outrun its permitted period, and it will be found — by an acquirer’s diligence team if not by the bank.
Parking the Money, Pledging the Assets, and the Guarantee You Cannot Get
Drawdown is gated. Section 10(1) requires a Loan Registration Number from the Reserve Bank, obtained through the designated Authorised Dealer Category I bank, before any drawdown.
Then the proceeds have to sit somewhere lawful. For rupee ECB raised for permitted Indian expenditure, section 10(2) requires the funds to be credited to an INR account within one month, with pending amounts investable in unencumbered fixed deposits of up to one year. For foreign-currency ECB for permitted foreign expenditure, section 10(3) allows credit to an FCY account in India or abroad, with pending amounts investable outside India on comparable terms.
Security is broader than many lenders expect. Section 11(1) permits “(a) Creation of charge on immovable assets, movable assets, financial assets and intangible assets (including intellectual property rights) in favour of the non-resident lender or security trustee; and (b) Issue of guarantee in favour of the lender or security trustee.”
The express mention of intellectual property rights is worth pausing on. An India-based R&D or engineering subsidiary whose balance sheet is mostly people and IP can offer security over that IP to its foreign lender. Whether it should — given what a charge over core IP does to future financing and to a later sale — is a separate commercial judgement.
One hard stop: section 11(3) provides that “Entities regulated by the Reserve Bank shall not provide (issue) any type of guarantee.” A comfort letter from the subsidiary’s Indian bank is not available as credit support for the parent loan.
Reporting: Form ECB 1, Form ECB 2 and Seven Calendar Days
The forms have been renamed and the deadline has been re-based. Both details will break an existing compliance calendar quietly, and both apply from the moment funding an Indian subsidiary takes the form of a loan rather than shares.
Section 16(1) requires the borrower to submit, through the designated AD Category I bank: “(a) ‘Form ECB 1’ for providing details of the ECB and obtaining LRN; (b) ‘Revised Form ECB 1’ for reporting any change in previously reported ECB parameters in ‘Form ECB 1’, within seven calendar days from the end of the month in which such change was given effect; and (c) ‘Form ECB 2’ for reporting receipt of ECB proceeds and debt servicing, within seven calendar days from the end of the month in which the proceeds were received or debt servicing was undertaken.”
The deleted text required Form ECB 2 to “reach DSIM within seven working days from the close of month to which it relates”. Seven working days and seven calendar days are not the same deadline, and in a month ending near a festival cluster the gap is material. If your calendar still says working days, it is wrong.
Section 16(2) handles lateness without naming a figure: “In case of non-adherence with reporting timelines, the borrower may pay late submission fee as per the guidelines issued by the Reserve Bank in this regard after completing the reporting.” The fee is set by RBI guidance rather than by the Regulations, so the current matrix has to be confirmed at the time rather than quoted from an old memo — which is precisely why we do not reproduce one here.
Changes to the deal are also governed. Section 14(1) permits changes to “the parameters, terms and conditions governing the ECB” subject to the lender’s consent and compliance with Schedule I; section 14(3) requires a no-objection certificate from the existing bank before changing the designated AD bank. Reporting is one clock among several; the rest are in our FEMA reporting guide.
Turning the Loan Into Equity Later
A parent loan can become shares. Section 13(1): “An ECB (including those which is matured but unpaid) may be converted into a non-debt instrument, subject to compliance with the Foreign Exchange Management (Non-Debt Instruments) Rules, 2019.” The unpaid-at-maturity inclusion is the useful part: a loan the subsidiary cannot repay is not stranded.
Section 13(2) attaches three conditions: “(a) No additional costs payable to the lender for enabling such conversion; (b) Consent of the lender is in place; and (c) Consent of other lenders, if any, is available or at least information regarding conversions is exchanged with other lenders.”
Because the conversion lands under the Non-Debt Instruments Rules, the equity-side requirements come with it — pricing and the FC-GPR reporting of the issue. A conversion is a share issue that happens to extinguish a loan, not a bookkeeping entry.
Debt servicing in the ordinary course is permitted by section 15(1): “Principal, interest, and other charges, in respect of ECBs undertaken in compliance with the ECB framework, may be remitted.” Section 15(2) requires repayment of an ECB raised from an NRO account to be credited only to the lender’s NRO account.
What We Will Not Guess: the Tax Side
Exchange control tells you whether the money may move. Tax tells you what it costs. They are decided by different authorities and they fail independently, and the second one is where this article stops short deliberately.
India’s income-tax statute has been renumbered, and the forms moved with it: the declaration filed before money leaves India is now Form No. 145, which the Income Tax Department’s own guidance describes as “a new form that replaces the old Form 15CA for sending money outside India”. Any rate, threshold or section number we cannot read today from a primary source is not going into a page that people plan around. What we can say structurally is this: interest paid to a non-resident lender attracts Indian withholding at source, and a remittance out of India runs through a declaration regime before the bank will process it — the mechanics are in our article on TDS on payments to non-residents.
Two further interactions are worth flagging to your tax adviser rather than answering here. First, the arm’s-length requirement in section 9 of Schedule I sits alongside India’s transfer pricing rules, so the interest rate on a parent loan is tested twice, by two regimes, for two different purposes. Second, how a lender’s involvement with the Indian business is conducted can raise questions about taxable presence; we cover those in our guide to permanent establishment risk in India.
The shape of the decision survives the uncertainty. Funding an Indian subsidiary with debt and funding it with equity have different tax profiles in every jurisdiction, and the funding mix should be set with an Indian tax adviser and your group tax function in the room — before the first remittance, not after the first assessment.
A Funding Sequence That Survives Diligence
Funding an Indian subsidiary well is mostly a matter of order. The sequence below is the one that tends to hold up when an acquirer, a bank or a regulator later reads the file backwards.
- Fix the vehicle first. Eligibility to borrow turns on being incorporated, established or registered under a Central or State Act and on being permitted to borrow under that Act. Decide the vehicle, then the funding.
- Capitalise before you lever. Leg (b) of the limit is a multiple of audited net worth, and it counts domestic debt too. Equity first creates the base the multiple applies to.
- Price the loan as if it were third-party. The basis-point ceiling is gone for three-year-plus money, but section 9 requires arm’s length and transfer pricing will ask the same question from the other side.
- Check the maturity against the sector. Three years is the floor; one-to-three years is a manufacturing concession capped at USD 150 million outstanding; anything shorter is priced at the trade-credit ceiling.
- Get the LRN before the money moves. Drawdown before a Loan Registration Number is a reporting breach on day one.
- Put Form ECB 2 on a calendar-day footing. Seven calendar days from month end, for every month with a receipt or a debt-servicing payment.
- Audit the intercompany payables. Unpaid parent invoices are trade credit with a maturity limit, not working capital flexibility.
- Model the exit at the entry. Debt repays itself; equity leaves only through a dividend, a valuation-capped sale or a liquidation.
None of these steps is difficult in isolation. They go wrong because they are taken by different people in different months — the lawyer incorporates, the group treasurer wires, the local accountant discovers in March that a form was due in October. Keeping the sequence in one place is most of the work.
How PerspireIP Can Help
PerspireIP’s India team supports foreign companies, investors and funds through the finance and compliance side of an India entry, including the exchange-control mechanics of funding an Indian subsidiary: choosing and setting up the vehicle, mapping the FEMA and RBI reporting obligations that attach to a funding structure, financial and tax due diligence on Indian targets, outsourced accounting, and the ongoing compliance calendar of a foreign-owned Indian subsidiary. Our work is on India entry, due diligence and compliance.
We are explicit about scope. We do not issue valuation certificates, accountant’s certificates or auditor’s certificates, and we do not sign a statutory audit under the Companies Act — that requires a chartered accountant in practice registered with the Institute of Chartered Accountants of India. Where a filing needs a certificate from a named professional, we tell you which one and work alongside them. Pricing is scoped to the engagement; tell us what you are planning and we will tell you what the work involves.
This article describes professional services and is general information, not legal, tax or investment advice. Indian exchange control regulations, filing forms, cost ceilings and tax provisions change with each Finance Act, Gazette notification and RBI circular, and the right answer depends on your entity form, your sector and the terms of your borrowing. The provisions cited here were checked against the Reserve Bank of India sources linked above on 17 November 2026. Verify the current position, and take advice from a qualified Indian professional, before acting on any of it.
Frequently Asked Questions
What are the three ways of funding an Indian subsidiary from abroad?
Equity, borrowing and trade credit, each under a different part of India’s exchange control law. Subscribing for shares is governed by the foreign investment rules, which set a valuation floor for an unlisted company and require the issue to be reported in Form FC-GPR within thirty days. A loan from outside India is an external commercial borrowing under Schedule I of the Foreign Exchange Management (Borrowing and Lending) Regulations as amended with effect from 16 February 2026. An unpaid invoice from an overseas supplier, including a parent, is trade credit under Part II of RBI’s Master Direction on External Commercial Borrowings, Trade Credits and Structured Obligations, with its own maturity limit and cost ceiling.
Can a foreign parent lend money to its Indian subsidiary?
Yes, as an external commercial borrowing. Schedule I of the Foreign Exchange Management (Borrowing and Lending) Regulations, as amended by Notification No. FEMA 3(R)(5)/2026-RB with effect from 16 February 2026, makes any person resident in India other than an individual that is incorporated, established or registered under a Central or State Act an eligible borrower, subject to being permitted to borrow under that Act, and permits borrowing from a person resident outside India. The loan needs a Loan Registration Number before drawdown and reporting in Form ECB 1 and Form ECB 2.
Is there still an all-in-cost ceiling on Indian ECB?
Not for borrowings of three years or more. Section 7(1) of Schedule I states that the cost of borrowing shall be in line with prevailing market conditions, replacing the deleted basis-point spreads of benchmark plus 500 bps for new foreign-currency ECB and benchmark plus 450 bps for rupee ECB. Section 7(2) keeps a ceiling for ECB with an average maturity of less than three years, by requiring compliance with the trade-credit cost ceiling. Section 9 separately requires that ECB from a related party be on an arm’s length basis.
How much can an Indian company borrow from abroad?
Section 5(1) of Schedule I sets the limit as the higher of outstanding ECB up to USD 1 billion, or total outstanding borrowing, external and domestic, up to 300 per cent of net worth as per the last audited standalone balance sheet. The proposed borrowing, excluding refinancing, counts when testing compliance, and entities supervised by a financial sector regulator are exempt. This replaced a deleted provision allowing ECB up to USD 750 million per financial year under the automatic route, so the limit is now a continuously tested stock rather than an annual allowance.
What is the minimum maturity for an external commercial borrowing in India?
Three years. Section 6(1) of Schedule I requires a minimum average maturity period of three years. Section 6(2) allows a borrower engaged in the manufacturing sector to raise ECB with an average maturity between one and three years, provided the outstanding amount of such borrowings does not exceed USD 150 million. A borrowing shorter than three years must also comply with the trade-credit cost ceiling under section 7(2), and refinancing cannot be used to defeat the maturity applicable to the original loan.
When is Form ECB 2 due?
Within seven calendar days from the end of the month in which ECB proceeds were received or debt servicing was undertaken, under section 16(1)(c) of Schedule I. The same seven-calendar-day deadline applies to a Revised Form ECB 1 reporting a change in previously reported parameters. This replaced the deleted requirement that Form ECB 2 reach the Department of Statistics and Information Management within seven working days from the close of the month, so compliance calendars built on working days now run late.
Can external commercial borrowing be used for working capital in India?
The end-use test is now a prohibition list. Regulation 3A(1) of the amended Regulations lists the purposes for which borrowed funds shall not be utilised in India, including chit funds, Nidhi companies, real estate business and farmhouse construction, specified agricultural and plantation activity, trading in Transferrable Development Rights, transacting in securities other than named corporate actions, repayment of a domestic rupee loan that is a non-performing asset or was availed for a restricted end-use, and on-lending for any prohibited purpose. Working capital and general corporate purposes do not appear on that list, unlike in the deleted framework, which prohibited working capital except for borrowings from a foreign equity holder.
Is an unpaid intercompany invoice from the parent a loan?
It is trade credit, which is a separate regime. Section 4(3) of Schedule I excludes trade credit from the definition of ECB, and Part II of RBI’s Master Direction on External Commercial Borrowings, Trade Credits and Structured Obligations, updated as on 8 September 2026, continues to govern it. Paragraph 14 provides that the period of trade credit, reckoned from the date of shipment, shall be up to three years for import of capital goods, and for non-capital goods up to one year or the operating cycle whichever is less, with a cost ceiling of benchmark rate plus 300 bps for new foreign-currency trade credit and plus 250 bps for rupee trade credit.
Can a parent loan to an Indian company be converted into shares?
Yes. Section 13(1) of Schedule I provides that an ECB, including one that has matured but is unpaid, may be converted into a non-debt instrument subject to compliance with the Foreign Exchange Management (Non-Debt Instruments) Rules, 2019. Section 13(2) requires that no additional costs are payable to the lender for enabling the conversion, that the lender consents, and that other lenders consent or at least that information about the conversion is exchanged with them. Because the conversion is a share issue, the equity-side pricing and FC-GPR reporting requirements apply to it.