Table of Contents
Denmark will accept your colour figures without a murmur. Then it will publish them in black and white, and the shading that carried your whole argument will be gone. That gap between what the Danish Patent and Trademark Office accepts at filing and what it reproduces at publication is the single most expensive misunderstanding about patent drawings in Denmark. The formal rules themselves are short: one section of an executive order, plus a set of office guidelines that the order delegates to. Here are the eight rules that actually decide whether your figures survive filing, publication and, later, a Danish court.
Which Rulebook Governs Patent Drawings in Denmark

Three different rulebooks can apply to the same Danish invention, and which one governs depends entirely on the route you filed through.
- National Danish application — governed by the Danish Patents Act and Bekendtgørelse om patenter og supplerende beskyttelsescertifikater, executive order no. 2111 of 24 November 2021, together with the DKPTO examination guidelines the order points to.
- European patent validated in Denmark — the figures were already examined under EPO practice, so Danish law never tests them again.
- Brugsmodel (utility model) — the Utility Models Act, with its own, looser drawing standard.
Order no. 2111 of 2021 matters because it replaced the instruments most English-language guides still cite. If a source quotes the Danish Patent Office Order no. 77 of 30 January 1997, or executive order no. 25 of 18 January 2013, it is quoting superseded law. Both were replaced, and the 2013 order is flagged as historical in Retsinformation, the official Danish statute database. The office itself publishes its current practice at dkpto.dk.
Denmark has been an EPC contracting state since 1990, which means the European route is available and heavily used. It is also why so few Danish drawing disputes ever reach a Danish examiner: the figures in most Danish-effective patents were cleared in Munich, not Taastrup.
Rule 1 and 2: Show the Necessary Detail, and Keep Text Out
The substantive Danish requirement is remarkably compact. Section 18(1) of order no. 2111 states that drawings and photographs must show the details necessary for understanding the invention, and that they must not contain any text except a single word or a few words where those are absolutely necessary for understanding.
Read those two sentences together, because they pull in opposite directions. The first is a sufficiency requirement: if a feature is in your claims, a skilled reader has to be able to find it in your figures. The second is a prohibition: you cannot discharge the first duty by labelling everything in prose.
In practice this is the rule that catches engineering teams who hand over CAD exports. A manufacturing drawing is covered in callouts, tolerances, material specifications and title blocks. All of that is text, none of it is “absolutely necessary for understanding”, and all of it has to come out and be replaced by reference numerals keyed to the description.
- Acceptable: Fig. 3, reference numerals, and an unavoidable word such as “water” or “open” where no numeral can convey it.
- Not acceptable: dimension strings, tolerance tables, material callouts, company title blocks, drawing-office revision stamps.
- Borderline: axis labels on a graph or waveform, which DKPTO will usually tolerate because the figure is meaningless without them.
Section 18(2) then says drawings and photographs must otherwise be executed in the form prescribed by the Patent and Trademark Office, cross-referring to section 7(2). That single sentence is what makes the DKPTO guidelines binding in practice rather than advisory.
Rule 3: Separate Sheets, A4, and “Suitable for Reproduction”

Under section 7(2), the application and its attachments — description with any drawings, photographs and sequence listing, the claims and the abstract — must be drawn up in a form suitable for reproduction. The DKPTO guidelines add that drawings must be filed on separate sheets and may not sit inside the description, the claims or the abstract.
Danish filings run on A4 (210 × 297 mm). Be careful with the margin figures you find quoted alongside it, though: DKPTO’s published margins — left 30–40 mm, top 20–40 mm, right 20–30 mm, bottom 20–30 mm, with 1½ line spacing and every fifth line numbered — are the rules for the text pages. They are not drawing-sheet margins, and a draughtsman who applies them to figures will produce an unnecessarily cramped sheet.
“Suitable for reproduction” is the operative standard for the figures themselves, and it is a functional test rather than a numeric one. The question an examiner asks is whether the sheet will still read correctly after the office’s own imaging and publication pipeline has processed it. That is a lower bar than the USPTO’s explicit dimensional rules, and a less predictable one.
Rule 4: Black Lines That Survive a Two-Thirds Reduction
DKPTO’s drawing guidelines require that lines and strokes be executed in black, with line thickness chosen for legibility. The critical test is the reduction test: a Danish drawing must remain clear when reduced to two-thirds of its filed size.
That number is worth building into your drafting standard, because it is stricter in effect than it sounds. Hairline strokes, fine stipple, 0.1 mm leader lines and dense cross-hatching all pass inspection at full size and collapse into grey mush at 67%. If your draughtsman cannot print the sheet at two-thirds and still read every numeral, the figure is not compliant, whatever it looks like on screen.
Scale is handled graphically. DKPTO’s guidance is that a graphic scale representation should remain usable after reduction, rather than relying on a written note such as “actual size” or “½ size” — notations that become false the moment the office reduces the sheet. This is the same logic the USPTO applies, and it catches the same people.
Photographs get a cool reception. The guidelines note that heliographic prints rarely meet the standards, and photographs are discouraged in favour of line drawings wherever the subject can be drawn at all. If you must file photographs, treat them the way you would at the USPTO: as a last resort for subject matter that genuinely cannot be rendered as a line drawing.
Rule 5: Hatching and Reference Numerals That Stay Readable
Cross-sections in Danish drawings are hatched with regular, evenly spaced lines, and the spacing is chosen in proportion to the area being filled. A large sectioned area takes wider spacing; a small one takes tighter spacing. The purpose is uniform apparent density after reduction, not decoration.
The useful detail is the exception DKPTO allows: hatching may be interrupted where a reference numeral falls inside a sectioned area, so the numeral is not obscured. Numerals may also sit outside the hatched region with a leader line running in. Legibility of the numeral wins over continuity of the hatch.
Figures are numbered consecutively across the whole application, independently of how the sheets themselves are numbered. Three figures on sheet 1 and two on sheet 2 are Fig. 1 through Fig. 5, not Fig. 1.1 through Fig. 2.2. Photographs, where used, are likewise numbered consecutively.
Every numeral in the figures must correspond to the same numeral in the description, and the correspondence has to run both ways. A numeral in a figure with no counterpart in the description is the most common formal objection in any jurisdiction, and Denmark is no exception — the same discipline we set out in our guide to patent drawing reference numerals.
Rule 6: Colour Is Accepted, Then Published in Black and White

This is the Danish trap, and it is the reason this post exists. DKPTO accepts drawings and photographs on filing in both colour and black and white. There is no petition, no extra fee, no special request. And then the office’s own guidance warns that the application will be published in black and white, so details in a colour drawing may disappear at publication.
Nothing rejects your filing. Nothing flags it. You simply end up with a granted Danish right whose published figures no longer show the distinction your colour was carrying. If your colour was doing real work — distinguishing two fluid paths, separating electrode layers, identifying a coating — that work is now invisible to every examiner, licensee and judge who reads the published document.
The fix is the same discipline that good practice demands everywhere: never let colour be load-bearing. Carry the distinction in hatch pattern, line style, stipple density or reference numerals, and let colour be redundant reinforcement. Then monochrome publication costs you nothing.
Denmark is a useful place to see how far the three systems have diverged on this point:
- DKPTO — colour accepted at filing, publication in black and white.
- EPO — since 1 October 2025 the EPO accepts drawings filed electronically in colour or greyscale, provided they are contrast-rich and clear at 300 dpi. This came in by a Decision of the President of the EPO, OJ EPO 2025, A49, with the implementing notice at OJ EPO 2025, A57. Colour applies to the drawings only; description, claims and abstract stay black and white.
- PCT — unchanged. Rule 11.13(a) PCT still requires drawings in durable black lines “without colorings”. An international application is not the place to introduce colour.
We cover the European half of this in more depth in EPO colour patent drawings, and the PCT constraint in PCT drawing requirements.
Rule 7: Your Figures May Be Annotated in Danish or English
Denmark is generous on language, and this is a genuine cost saving. The description — including any drawings, photographs and sequence listing — together with the claims and the abstract may be drawn up in Danish or English. Annotations and text matter in drawings follow the same rule: Danish or English is acceptable.
Because section 18(1) already restricts figure text to the few words that are absolutely necessary, the language question rarely becomes expensive. But it does mean that an English-language figure set prepared for a US or PCT filing can usually go into a Danish national application without being re-lettered, which is not true everywhere in Europe.
The exception is the brugsmodel. Utility model applications must be filed in Danish, or a Danish translation must follow within one month of filing, failing which the application is deemed withdrawn. If the utility model route is anywhere in your plan, budget for translation from the start.
For European patents taking effect in Denmark, the London Agreement governs. Denmark is a London Agreement state: a European patent granted in English needs its claims translated into Danish, while the description may remain in English. Your figures are not translated at all — another reason to keep text out of them.
Rule 8: Match the Figures to the Route — National, European or Brugsmodel
The last rule is strategic rather than formal. Denmark gives you three routes, and they do not impose the same drawing standard, so the figure set should be prepared for the route you are actually taking.
National Danish filing and the PCT national phase. Denmark does allow PCT national phase entry, with a time limit of 31 months from the priority date under both Article 22(3) and Article 39(1)(b) PCT, as recorded in the WIPO PCT Applicant’s Guide national chapter for Denmark. It is not one of the states that closed its national route in favour of the EPO. Translations of the description, claims, any text matter of the drawings and the abstract must be in English or Danish. Our guide to the PCT national phase in Denmark walks the rest of that entry.
Brugsmodel. A Danish utility model requires novelty and industrial applicability but not inventive step, registers in months rather than years, and runs for up to 10 years. Drawings must be of a quality suitable for reproduction and must enable a skilled person. Notably, DKPTO allows a utility model to be sought instead of, or in addition to, a national patent when entering the national phase — a hedge that is genuinely useful for short-cycle mechanical products.
European patent validated in Denmark. The figures are examined under EPO practice and never retested in Denmark. This is where the deleted-rule problem bites: a great deal of published guidance still says European drawings are governed by Rule 46 EPC.
Rule 46 EPC no longer exists. It was deleted with effect from 1 February 2023, along with Rule 49(3)–(12) EPC, as part of the EPO’s digital-transformation package. The form requirements moved into a Decision of the President of the EPO published in the Official Journal — precisely what allowed the EPO to permit colour in 2025 without amending the Implementing Regulations. If your checklist still cites Rule 46 EPC as live law, it is three years out of date; see EPO drawing requirements for the current position.
Nordic practice is close enough that the comparison is worth drawing. Our companion guides to patent drawings in Sweden and patent drawings in Norway set out where PRV and Patentstyret differ from DKPTO.
Where Danish Drawing Disputes Are Decided
Formal compliance is an administrative problem. Drawing content becomes a litigation problem, because figures are read as part of the disclosure when a court construes claims or tests added matter.
Denmark’s first-instance patent court is the Maritime and Commercial High Court — Sø- og Handelsretten — in Copenhagen, founded in 1861. It normally sits with two technically qualified judges alongside one legally trained judge, which is unusually favourable for drawing evidence: the bench can read a sectional view without being walked through it by an expert. Appeals go to the High Court of Eastern or Western Denmark, and only rarely to the Supreme Court.
Denmark has also ratified the Unified Patent Court Agreement and hosts a UPC local division in Copenhagen. For a European patent with unitary effect, or an unopted-out classical European patent, that is where infringement will be heard instead. Note that UPC membership and EPC membership are different things — Spain and Poland never joined the UPC, Ireland has signed but not ratified, and the UK left after Brexit.
The practical consequence for drawings is the same in both forums. A figure that was “good enough” to get through a formalities check, but that omits a feature you later need to rely on, cannot be repaired after filing — adding it is added matter. Our note on amending patent drawings explains how narrow that window is, and patent litigation in Denmark covers the procedure.
How Denmark Compares to USPTO Drawing Practice
If you are coming from US practice, the difference is one of specificity rather than severity. The USPTO tells you the numbers; Denmark tells you the outcome and leaves the numbers to the office.
- Sheet size. 37 CFR 1.84(f) permits A4 (21.0 × 29.7 cm) or 21.6 × 27.9 cm (8½ × 11 inches). Denmark is A4 only.
- Margins. 37 CFR 1.84(g) sets explicit sheet margins for A4 — top 2.5 cm, left 2.5 cm, right 1.5 cm and bottom 1.0 cm. Denmark publishes no equivalent numeric drawing-sheet margin; the test is reproducibility.
- Lines. 37 CFR 1.84(l) requires durable, clean, black, sufficiently dense and dark, uniformly thick and well-defined lines. Denmark requires black lines legible at a two-thirds reduction — the same idea, expressed as a test rather than a specification.
- Character height. 37 CFR 1.84(p)(3) requires numbers, letters and reference characters at least 0.32 cm (⅛ inch) high. Denmark sets no figure, which in practice means you should adopt the US number anyway.
- Colour. At the USPTO, colour drawings in a utility application need a petition and fee under 37 CFR 1.84(a)(2); photographs are not ordinarily permitted under 1.84(b). Denmark accepts colour with no petition and then publishes in monochrome.
- Designs. 37 CFR 1.152 requires design drawings to comply with 1.84 and governs the use of broken lines for unclaimed subject matter. Denmark has no design patent — industrial designs are registered separately at DKPTO and under the EU design system.
The transferable lesson is that a figure set built to 37 CFR 1.84 will almost always satisfy Denmark on form. What it will not do is protect you from the colour-to-monochrome conversion, because at the USPTO your colour was deliberate and petitioned, while in Denmark it is silently discarded.
A Pre-Filing Checklist for Danish Figures
Run this before anything goes to DKPTO. It takes a draughtsman about twenty minutes and it removes almost every objection we see on Danish filings.
- Print the sheet at two-thirds size. If any numeral, leader or hatch is unclear, thicken it now.
- Strip every piece of text that is not a reference numeral, a figure label, or a word that is genuinely unavoidable.
- Confirm every numeral in the figures appears in the description, and every numeral in the description appears in the figures.
- Convert the sheet to greyscale and check that nothing is lost. If something is, re-encode the distinction as hatch, line style or numeral.
- Renumber figures consecutively across the whole application, independently of sheet numbering.
- Check that each sectioned area is hatched at a spacing proportionate to its size, with hatching interrupted where numerals fall inside.
- Put the drawings on their own sheets, A4, with nothing from the description bleeding onto them.
- Decide the route — national, PCT at 31 months, European validation, or brugsmodel — and confirm the figure set matches it.
For Danish-market work we handle this locally. Our draughtsmen prepare and remediate figures through patent drawing services in Copenhagen and in Aarhus, and the wider Danish practice picture sits on our Denmark IP services hub.
Get Danish-Compliant Figures Before You File
PerspireIP draughtsmen prepare and remediate patent drawing services to current DKPTO, EPO and PCT standards — including the greyscale-safe redraw that keeps your figures intact through Danish publication.
Send us your CAD exports, your photographs or a competitor’s published figures and we will tell you what needs to change before filing. Talk to our drawing team.
Frequently Asked Questions
Can I file colour patent drawings in Denmark?
Yes. DKPTO accepts drawings and photographs in both colour and black and white at filing, with no petition or fee. But the application is published in black and white, so any detail carried only by colour may disappear at publication. Never let colour be load-bearing.
Which rules govern patent drawings in Denmark?
Executive order no. 2111 of 24 November 2021 on patents and supplementary protection certificates. Section 18(1) requires drawings to show the details necessary to understand the invention and to contain no text beyond a few absolutely necessary words; section 18(2) delegates the form to DKPTO’s own guidelines.
Is Rule 46 EPC still the rule for European drawings?
No. Rule 46 EPC was deleted with effect from 1 February 2023, together with Rule 49(3)-(12) EPC. The form requirements moved into a Decision of the President of the EPO published in the Official Journal, which is how the EPO was able to allow colour drawings from 1 October 2025.
What language can I use in Danish patent drawings?
Danish or English. The description including drawings, photographs and any sequence listing, plus the claims and abstract, may be in either language, and annotations in drawings follow the same rule. A brugsmodel application, however, must be in Danish or have a Danish translation filed within one month.
How long do I have to enter the PCT national phase in Denmark?
31 months from the priority date, under both Article 22(3) and Article 39(1)(b) PCT. Denmark kept its national route open, and a brugsmodel may be sought instead of or in addition to a national patent on entry.
Which court hears patent cases in Denmark?
The Maritime and Commercial High Court (So- og Handelsretten) in Copenhagen is the first-instance patent court, normally sitting with two technical judges and one legally trained judge. Denmark has also ratified the UPC Agreement and hosts a UPC local division in Copenhagen.